NUMBER OF DRAWERS : 24 Pieces
NUMBER OF CABINETS : 2 Pieces
Our product is produced from the bottom 35x35x1,50 mm box profile, electrostatic powder painted. 25 mm raw MDF is used in the top of our product. Our single door wardrobe and 24 drawer cabinet, which is located in our workbench, is produced with a solid steel construction welded from 1,20 mm dkp sheet. There is a fixed shelf made of 1 galvanized sheet in height-adjustable cabinet. The rails in our drawers are made of 2,50 mm hrp sheet and work on 4 pieces of 6201 zz bearings. Our drawer handles are matt anodized coated aluminum profiles. Drawer interiors can be adjusted at 17 mm intervals, with separator channels. In our product, there are 2 pieces of 550x1700mm, 10×10 square holes, 2 sliding doors, locked tool hanging panels and 4 sliding folder cabinets at the top.
The cabinet main body of our 5 drawer tool cart under the bench is made of 1.00 mm dkp sheet; It is produced as welded, robust steel sheet construction. It has 2 key central lock system. Our drawers are used with 100% opening telescopic rails, the interior is only with a vertical 17 mm spaced separator channel and has a net 390x500mm internal usage area. Each drawer has a carrying capacity of 30 kg. Our drawer lock system; It is a safe system with one drawer open while the other is unopened. There are extra safety latches in the drawers from the OHS angle. Our drawer handles; They are produced from anodized and anodized aluminum profile with label seats. Our cabinet has a vacuum abs plastic pool with a compartment. It has push handles and rubber wheels. It is painted with electrostatic powder paint.
Our 5-shelf material cabinets on the left side of our study car; It is produced as electrostatic powder painted with solid steel construction welded from 0,8 mm dkp sheet. There are 4 rack guide pillars perpendicular to the material cabinet. Inside the cabinet, there are fixed shelves made of 5 galvanized sheets and adjustable height. There are M12 ball joint wedges adjusted to the ground. Doors with flush handles, cylindrical safety lock and 180 degree opening.
Our 4-rack material cabinets on the right side of our working trolley; It is produced as electrostatic powder painted with solid steel construction welded from 0,8 mm dkp sheet. Inside the material cabinet, there are 4 rack guide posts perpendicular and a tool hanging board with 450x980mm dimensions and 10×10 square holes. Inside the cabinet, there are fixed shelves made of 4 galvanized sheets and adjustable height. There are M12 ball joint wedges adjusted to the ground. Doors with recessed handles, cylindrical safety lock and open 180 degrees.
