NUMBER OF DRAWERS :8 Pieces
NUMBER OF CABINETS : 3 Pieces
Our product is produced from the bottom 35x35x1,50 mm box profile, electrostatic powder painted. 25 mm raw MDF is used in the top of our product. Our 2-door wardrobe and 8-drawer cabinet, which is located in our workbench, are produced with a solid steel construction welded from 1,20 mm dkp sheet. There are fixed shelves made of 1 galvanized sheet in height-adjustable shelves. The rails in our drawers are made of 2,50 mm hrp sheet and work on 4 pieces of 6201 zz bearings. Our drawer handles are matt anodized coated aluminum profiles. Drawer interiors can be adjusted at 17 mm intervals, with separator channels. In our product, there is a 10×10 square perforated tool hanging board with dimensions of 550x1700mm and a sliding folder cabinet at the top.
3 pieces of 7 shelves material cabinets on the left and right sides of our workbench; It is produced as electrostatic powder painted with solid steel construction welded from 0,8 mm dkp sheet. There are 4 rack guide pillars perpendicular to the material cabinet. Inside each cabinet, there are fixed shelves made of 7 galvanized sheets and adjustable height. There are M12 ball joint wedges adjusted to the ground. Doors with recessed handles, cylindrical safety lock and open 180 degrees.
