NUMBER OF DRAWERS :11 Pieces
NUMBER OF CABINETS : 2 Pieces
Our product is produced from the bottom 35x35x1,50 mm box profile, electrostatic powder painted. 25 mm raw MDF is used in the top of our product. Our cabinet with 11 drawers in our work cart is produced with a solid steel construction welded from 1,20 mm dkp sheet. The rails in our drawers are made of 2,50 mm hrp sheet and work on 4 pieces of 6201 zz bearings. Our drawer handles are matt anodized coated aluminum profiles. Drawer interiors can be adjusted at 17 mm intervals, with separator channels. In our product, there are two 10×10 square perforated tool hanging board with dimensions of 550x1120mm. 125 mm rubber wheel is used in our product. Our 5 shelves material cabinets on the left side of our work cart are; It is produced as electrostatic powder painted with solid steel construction welded from 0,8 mm dkp sheet. Inside the material cabinet, there are 4 rack guide rails vertically and 10×10 square hole tool hanging board with dimensions of 915x685mm and 8 A-100 toolboxes. Inside the cabinet, there are fixed shelves made of 5 galvanized sheets and adjustable height. There are M12 ball joint wedges adjusted to the ground. Doors with recessed handles, cylindrical safety lock and open 180 degrees. Our 7 shelves material cabinets on the right side of our work cart are; It is produced as electrostatic powder painted with solid steel construction welded from 0,8 mm dkp sheet. There are 4 rack guide pillars perpendicular to the material cabinet. Inside the cabinet, there are fixed shelves made of 7 galvanized sheets and adjustable height. There are M12 ball joint wedges adjusted to the ground. Doors with recessed handles, cylindrical safety lock and open 180 degrees.
